Maximum Equipment, Maximum Systems, Maximum Technical Services,Spray Booths, Blowtherm, Global Finishing, Hankinson, Pyrmid, Becca, Garmat, Zonga, Spray Tech, Bleeker Bros, Painting, Spraying, Automotive, Industrial, Prep Stations, Mixing Rooms, Eurovac, Filters, Airflow, Kaiser, Infared, Generating Group, Devilbis, Binks, Service, Refinishing, IRT, RTI, Envirocure, Proclean, High Capacity Spray Booths, Downdraft Design, Ultra XL, Ultra XL insulated, Ultra XL single skin, Pressurized Crossdraft Design, Non-Pressurized Corssdraft Design, Dual Skin, insulation, Make-up systems, Forced Dry, Recirculating Cure, Paint Mixing Rooms, Vestibules, 2-axis, 3-axis painters lifts, Sound attenuation, VOC abatement systems, Control Systems, PLC, monitoring systems, electro mechanical, Planning assistance, installation, Startup, Training, Maintenence, ETL,Three Air Flow Zones, Micro Clean CAF, CAF, COntrolled Air Flow, Doqwndraft Celing Media, Dustlock Adhesive, Expert 2, Expert, Recirculating Downdraft sparybooth, CureTronic, PLC Controls, Pits, Intakes, Exhaust Stacks, Three Row Pits, corner lights, 6-tube, corner lights, lights, motors, motor starters, disconnect switches, limit switches, push buttons, Expert 1, CFM, BTU, Direct Fire Industrial Air heater, Air Heaters, Air heater, Automatic recycle feature, saving fuel energy, Fire supression, variable frequency drives, NFPA-33, NFPA-86, NFPA-91, NFPA-101, NFPA-70, OSHA, IFC, IBC< IMC, BOCA, UFC, UBC, UMC, SBCCI, Code compliance, High efficiency filters, SM 34 High Capacity, Global Filter Media, Polyb, TotalTac, Smart Media, Devilbiss, Air Compressors, Service Kits, Mainencance Kits, Valve disc, Jam & cap nuts, Set screws, Valve springs, Valve gaskets, Series, Filters for compressed air, Separator filter, micron de-soiling filter, high efficiency filter, vapour filter,Universal industrial spray booths, expandable Modular design, Standard air velocites, FPM, filtered entry doors, solid entry doors, filtered intake plenums, crane opening, conveyor openings, air replacment units,Tubeaxial non-sparking exhaust fans, high efficiency TEFC type 3, Phase Multi-voltage electric exhaust fan motor, variable pitch pulleys, manometer, top or rear exhaust outlet, light fixtures, working compartment extensions,control panels, control packages, curtains, custom booths, touch screen controls, yoke style plenum, soilid style plenum, paint pockets, spiral ducts, roof flanges, automatic shutter, fan support frame, fan connector ring, fan motor housing, filtration, open face industrial booths, bench floor, removing airborne paint particles, balanced airflow

Maximum Equipment
Main Office:
5550 Brooks St.
Montclair, California 91763

Phone:

800-318-6508
909-391-5139

Fax:
909-391-5866

E-mail

PR-2000 Inverter Spot Welding System

PR-2000 is designed with the latest inverter technology. The weld current is delivered at 2000 Hz., compared to conventional spot welders which use 60 Hz. The advantage is more energy per time which results in more powerful welds and shorter weld time. The high frequency DC weld current works extremely efficiently with galvanized and coated metals used in today's automobiles. The break-down in the metal properties is minimal, preventing the HSS (high strength steel) values from breaking down.

The inverter system is the latest and most advanced technology available for resistance spot welding. This new technology replaces the old type 3 phase DC welders because of its many advantages such as:

More weld power, shorter weld duration.
Less consumption of primary power.
Cleaner weld current, less interruption of electrical system in the shops.
Smoother DC ripple from the high frequency weld current, resulting in better welds.

Inverter technology's small demand on the incoming power is a huge advantage. Weak electrical power sources are common in the U.S., which creates big problems when using 3 phase non-inverter spot welders.


	Brochure
	Component List
	PS-500 Brochure
	C-X Brochure
	Single-Sided Applications


	Double-Acting Spot Gun New innovative Spot Gun from Pro Spot features double-acting cylinder, wide-spreading electrodes, self-aligning electrodes...

	Extension Arms The Pro Spot PR-2000 comes with a variety of extension arms to accommodate any welding job situation...

	Wheel House Arm The wheel house adapter allows access to hard to reach areas such as the wheel house...

	C to X Adapter Get the best of both worlds. Now in one gun and two adapters. Transform your gun from C to X in 15 seconds...

	Control Panel PR-2000 Digital Control Panel allows the user to select from pre-programmed welding modes as well as manually control weld current and time...

	Single-Sided Welding 10 different Single-Sided welding applications give you the power and versatility to complete any job...

	Pro Pull Dent Pulling (optional) Pro Pull is the latest in dent pulling technology for the collision industry. This tool makes dent pulling into art...

	PR-2000 Combi: Built-in MIG Welder PR-2000 features an easy upgrade to include a PR-155 MIG welder. It can be installed later as an upgrade package or ordered with MIG welder built-in from the factory...

	PR-2000 Overhead Installation Pro Spot PR-2000 comes in an overhead ceiling-mounted version. The ceiling-mounted version hangs from the ceiling at 20' bracket spacing...


Spot welding of quarter panel using C-Arm (PS-302).	PS-52 Wheel House Arm is a must for tight areas with limited space for the electrodes.

For deeper needs use the Pro Spot extension arms. They are self-aligning and quick to install.	Wheel House welding with PS-52 Arm makes it possible to weld the most difficult applications.

Consistent weld quality with short weld time thanks to the latest inverter technology	In this sheer strength test, the PR-2000 weld holds more than 2200 lb. (1000kg). This test was done on two, 16ga. galvanized steel strips (1.57mm thickness) . Note how the metal tears around the weld nugget. The PR-2000 welds measure up to the factory requirements weld after weld.

Features:

Inverter technology, 2000Hz.
4 cable system
Works on 1 and 3-phase input
Double-Acting Spot Gun
Two sided spot welding
Single sided welding
X-Gun adaptive
Spot hammer dent pulling
Pro Pull dent pulling (optional)
Washer welding
Nut and bolt welding
Carbon shrinking
Contact shrinking
Stitch welding
Nail welding
Moulding clip rivet welding
Upgradable to overhead installation
Built-in MIG welder available (optional)

Technical Talk... PR-2000
Input voltage: Welding amperage: Cable length: Electrode pressure: Cooling system: Welding cable cooling: Micro processor program: Extension arm system: Shipping weight:	1 or 3 phase 208-240V 50/60 Hz. OR 400-420V 50/60 Hz. 9500A max (3-phase) 6300A max (1-phase) 8" (2.5m) standard At 7 bars (90 PSI)-280 DaN (616 Lb) Air (2 fans) Air cooling Digital control Up to 23.6" (600mm) reach 365lb (166kg)