Recovery
Powder Booths
Vertical
Cartridge Filters Designed to improve Air Flow, Transfer
Efficiency, and Coating
Powder
Module
Re-circulates
clean filtered air. Includes; 5 HP direct drive blower 208
230/460V 60hz 3P. High performance non-sparking 20'' fan for
quiet operation. Six high efficiency primary cartridge
filters. Air solenoid valves. Four final filters.
Reverse
Pulse Cleaning
Eliminates
downtime for filter cleaning. The control panel features a
Photohelic® pressure gauge that monitors pressure drops and
initiates the high velocity of air that is automatically
injected into each filter on a sequential basis.
|
 |
Powder
Booth System Includes:
- Powder
Module is Factory Assembled.
- Heavy-Duty
18-Gauge Galvanized Panels.
- Steel
Interior Floor for Easy Cleanup.
- On
& off switch with timer board for filter pulsating.
- 3-Pin
115-volt solid-state timer board, factory adjusted at 100
milliseconds on time; and a 10 second duration off time
between pulses.
- Fluorescent
4-tube light fixtures.
- Optional
- Deluxe Control Panel includes: Motor starters, circuit
protection, transformer, pulse cleaning sequential controls,
Photohelic gauge, start and stop buttons, disconnect switch,
indicator lights, and NEMA 12 enclosure.
- Conveyor
Openings are Optional on PCB-150, PCB-250, and PCB-350 Models.
Custom Front Booth Panel Depending on Product Size will be
Required to Control Airflow.
- Side
Mounted Modules are Designed for Booth Walk-In Powder
Applications for Models PCB-200, PCB-300, and PCB-400.
Improves Transfer Efficiency.
- Models
PCB-425 and PCB-475 are Conveyorized Booths.
|
Booth
Construction
Self-supporting, 18-gauge galvanized steel panels. Panels are
precision-flanged for a smooth interior and pre-punched for easy,
accurate assembly.
Model
PC-100
- Completely
Assembled and Pre-Tested. 4'W x 8'2"H x 3/D. 4,000 SCFM
- 99.8%
Filter Efficiency down to 0.5 Microns
- Features
Air Velocity Control Device
- Provides
Manual Control of Air Velocity
|
 
|
|
