Maximum Equipment, Maximum Systems, Maximum Technical Services,Spray Booths, Blowtherm, Global Finishing, Hankinson, Pyrmid, Becca, Garmat, Zonga, Spray Tech, Bleeker Bros, Painting, Spraying, Automotive, Industrial, Prep Stations, Mixing Rooms, Eurovac, Filters, Airflow, Kaiser, Infared, Generating Group, Devilbis, Binks, Service, Refinishing, IRT, RTI, Envirocure, Proclean, High Capacity Spray Booths, Downdraft Design, Ultra XL, Ultra XL insulated, Ultra XL single skin, Pressurized Crossdraft Design, Non-Pressurized Corssdraft Design, Dual Skin, insulation, Make-up systems, Forced Dry, Recirculating Cure, Paint Mixing Rooms, Vestibules, 2-axis, 3-axis painters lifts, Sound attenuation, VOC abatement systems, Control Systems, PLC, monitoring systems, electro mechanical, Planning assistance, installation, Startup, Training, Maintenence, ETL,Three Air Flow Zones, Micro Clean CAF, CAF, COntrolled Air Flow, Doqwndraft Celing Media, Dustlock Adhesive, Expert 2, Expert, Recirculating Downdraft sparybooth, CureTronic, PLC Controls, Pits, Intakes, Exhaust Stacks, Three Row Pits, corner lights, 6-tube, corner lights, lights, motors, motor starters, disconnect switches, limit switches, push buttons, Expert 1, CFM, BTU, Direct Fire Industrial Air heater, Air Heaters, Air heater, Automatic recycle feature, saving fuel energy, Fire supression, variable frequency drives, NFPA-33, NFPA-86, NFPA-91, NFPA-101, NFPA-70, OSHA, IFC, IBC< IMC, BOCA, UFC, UBC, UMC, SBCCI, Code compliance, High efficiency filters, SM 34 High Capacity, Global Filter Media, Polyb, TotalTac, Smart Media, Devilbiss, Air Compressors, Service Kits, Mainencance Kits, Valve disc, Jam & cap nuts, Set screws, Valve springs, Valve gaskets, Series, Filters for compressed air, Separator filter, micron de-soiling filter, high efficiency filter, vapour filter,Universal industrial spray booths, expandable Modular design, Standard air velocites, FPM, filtered entry doors, solid entry doors, filtered intake plenums, crane opening, conveyor openings, air replacment units,Tubeaxial non-sparking exhaust fans, high efficiency TEFC type 3, Phase Multi-voltage electric exhaust fan motor, variable pitch pulleys, manometer, top or rear exhaust outlet, light fixtures, working compartment extensions,control panels, control packages, curtains, custom booths, touch screen controls, yoke style plenum, soilid style plenum, paint pockets, spiral ducts, roof flanges, automatic shutter, fan support frame, fan connector ring, fan motor housing, filtration, open face industrial booths, bench floor, removing airborne paint particles, balanced airflow

Maximum Equipment
Main Office:
5550 Brooks St.
Montclair, California 91763

Phone:

800-318-6508
909-391-5139

Fax:
909-391-5866

E-mail

PLEASE READ THESE TERMS OF USE CAREFULLY BEFORE USING THIS WEB SITE.

By using this site, you signify your assent to these terms of use. If you do not agree to them, please do not use the site. User expressly acknowledges that use of this site is at user's sole risk.

Restrictions on Use of Materials

This site is operated and maintained by the Maximum Equipment & Technical Services (referred to as "Maximum" herein). No material or information from this site may be copied, reproduced, republished, uploaded, posted, transmitted or distributed except as authorized in these terms of use, expressly authorized on the information or materials themselves, or approved in writing by Maximum.

Disclaimer of Liability

Maximum shall not be held liable for any improper or incorrect use of the materials or information described and/or contained in this site and assumes no responsibility for user's use of them. In no event shall Maximum be liable for any direct, indirect, incidental, special, exemplary or consequential damages (including, but not limited to, procurement or substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability or tort (including negligence or otherwise) arising in any way out of the use of this site or materials and information herein, even if advised of the possibility of such damage. This disclaimer of liability applies to any damages or injury, including but not limited to those caused by any failure of performance, error, omission, interruption, deletion, defect, delay in operation or transmission, computer virus, communication line failure, theft or destruction or unauthorized access to, alteration of, or use of record, whether for breach of contract, tortuous behavior, negligence or under any other cause of action.

Disclaimer of Warranties / Freedom from Computer Viruses /
Accuracy and Use of Information / Continuous Service

The materials in this site are provided "AS IS" and without warranties of any kind either expressed or implied. Maximum disclaims all warranties, express or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose.

Maximum does not warrant that the functions contained in the materials in this site will be uninterrupted or error-free, that defects will be corrected, or that this site or the server that makes it available are free from viruses or other harmful components.

Maximum does not warrant or make any representations regarding the use or the results of the use of the materials or information in this site, or the accuracy, adequacy, completeness, legality, reliability, or usefulness of any materials or information in this site. Changes may be periodically made to the content of materials or information in this site, and these changes may or may not be reflected in the materials or information as presented in the site. Additionally, due to the dynamic nature of the Internet, materials and information freely available one day may be restricted the next day, or undiscoverable due to changes in the organization of menus, homepages or files.

If you have obtained materials or information claimed to be from Maximum, from a source other than Maximum or this site, be aware that electronic data can be altered subsequent to its original distribution. Also, data and information can quickly become out-of-date. It is recommended that careful attention be paid to the contents of any metadata associated with a file, and that the originator of the data or information be contacted with any questions regarding appropriate use. If you find any errors or omissions in the materials or information in this site, we encourage you to report them to the Maximum Webmaster.

Disclaimer of Endorsement

Reference in this site to any specific commercial product, process or service by trade name, trademark, manufacturer or otherwise, does not constitute or imply an endorsement, recommendation or favoring by Maximum.

Disclaimer for Hypertext Links

Maximum is not responsible for the contents of any off-site materials referenced. The user specifically acknowledges that Maximum is not liable for the defamatory, offensive or illegal conduct of other users, links or third parties, and that the risk of injury from the foregoing rests entirely with the user.

Links from this site to other sites on the World Wide Web do not constitute an endorsement from Maximum. These links are provided for informational purposes only. It is the responsibility to the user to evaluate the content and usefulness of materials or information obtained from other sites.

Indemnification

To the extent permitted by applicable law, user agrees to defend, indemnify and hold harmless, Maximum or its directors, officers, employees and agents from and against all claims and expenses, including attorneys' fees, arising out of the user's use of this site or materials and information contained herein.

Choice of Law / Interpretation

These terms of use, including the legal disclaimers and indemnification, shall be governed by and construed in accordance with the laws of the State of California, without giving effect to any principles of conflicts of law. If any provision of these terms of use is declared unlawful, void or for any reason unenforceable, then that provision shall be deemed severable from the other terms and shall not affect the validity and enforceability of the remaining provisions.